Digi-Troll IV Transducer Provides bottom tracking ability to Digi-Troll IV downriggers. Network up to six downriggers to troll at set distances from the bottom through this single transducer. Includes mounting bracket and hardware. Part Number: 1491072
|
Plastic transom mount transducer with depth and temperature. Operating frequency of 200 and 50 kHz. Beamwidth of 15 degrees at 200 kHz, 45 degrees at 50 kHz. Transducer kit comes with mounting hardware and installation instructions.
|
Protective Cover for echo™ 100, 150 & 300c
The protective cover fits snugly over the display of echo™ 100, 150 and 300c to help protect them when not in use.
|
Protective Cover for echo&tade; 200, 500c & 550c
The protective cover fits snugly over the display of echo 200, 500c and 550c to help protect them when not in use.
|
Quick Release Mount for echo™ 100, 150 & 300c
Compatible with echo 100, 150 and 300c, this replacement mount features quick release capabilities and tilt/swivel for optimum viewing.
|
AD XTM 9
Transducer Mounting Hardware This hardware kit adapts to our standard transom mount transducers in the list below for use on the trolling motor. For use with:
XNT 9 QB 90 T XNT 9 SI 180 T XNT 9 QB 90 XNT 9 20 XNT 9 DI T 1157c 1158c 1158c DI 141C 161 323 325 343C 345c 345c DI 363 365i 383C 385ci 385ci DI 515 525 535 550 560 561 565 570 570 DI 575 580 581i 585C 586C 586c HD 587CI 587ci HD 595C 596C 596c HD 596c HD DI 597CI 597ci HD 597ci HD DI 717 718 727 728 737 747c 767 768 777c2 778C 778c HD 787c2 787c2I 788C 788ci 788ci HD 788ci HD DI 798c SI 798ci SI 798ci HD SI 858c 858c DI 917C 957 958c 958c DI 981C SI HDR 610 MATRIX 10 MATRIX 12 MATRIX 15 MATRIX 17 MATRIX 20 MATRIX 25 MATRIX 27 MATRIX 35 MATRIX 37 MATRIX 55 MATRIX 65 MATRIX 67 MATRIX 77C MATRIX 87C MATRIX 97 PIRANHA 1 PIRANHA 2 PIRANHA 3 PIRANHA 4 PIRANHA 5 PiranhaMax 10 PiranhaMax 15 PiranhaMax 150 PiranhaMax 160 PiranhaMax 170 PiranhaMax 180 PiranhaMax 190C PiranhaMax 20 PiranhaMax 210 PiranhaMax 215 PiranhaMax 220 PiranhaMax 230 PiranhaMax 240 PiranhaMax 30
|
Ethernet Cable - 10 Feet
Quickly setup an ethernet connection between two Humminbird ethernet capable units. Available in four lengths.
|
Ethernet cable - 20 feet
Quickly setup an ethernet connection between two Humminbird ethernet capable units. Available in four lengths.
|
Handheld GPS Connector Cable
Hand-held GPS Connector Cable connects a hand-held GPS unit to your Fishing System for easy viewability of trackplotting information. Key Features: All Matrix, 700 and 900 Series units are GPS capable. A user has three different GPS options with these products. They can either 1) plug in a GPS receiver into the accessory bus to get either GPS trackplotting or chartplotting data depending on the unit's capabilities 2) plug in a GPS receiver along with the Systemlink cable to allow two different units fishfinders to share one GPS receiver, or 3) plug in any of the four available GPS handheld cables that allow GPS trackplotting data to be transferred from any handheld GPS that has NMEA output capability to the fishfinder and displayed on the fishfinder screen. By using the handheld cables to connect the fishfinder to their handheld GPS unit the user can gain GPS trackplotting capability on the large display of their Matrix, 700 or 900 Series unit at a very low cost. The screens of handheld GPS units are small and often hard to view in extreme marine conditions. By using the handheld cables to transfer the GPS trackplotting data the user can view this information in an integrated form with their sonar information on a large sunlight viewable display. Bare wire NMEA connection cable
|
CC ICE
780015-1 Soft-sided carrying case. (No shuttle, battery, or charger)
|
MHX XNPT Portable Hardware Kit
Mounting hardware and suction cup for portable XNT transducers.
|
MHX-HS Transom Transducer Hardware
740011-1 Features:
|
MXH-ICE Ice Flasher Transducer Mounting Hardware Transducer Mounting Hardware and Float specifically for XI 9 19 Ice Transducer.
|
Power Cable
Power Cable replacements for all Humminbird fishfinders, radios, and GPS equipment have a connector at one end and soldered bare leads for connection to the power source at the other. Power connection should be made to the boat's fuse panel or through an inline fuse holder (not included on most cables) if made directly to the battery. Description: Power cable, 6 ft, waterproof. Used with all Humminbird products produced since 1989 For Use With: TCR-ID-1, TCR-101, TCR-ID-10, PLATINUM ID 120, PLATINUM ID 600, LCR400, LCR400 ID, DIM 3-120, DIM 3-600, LCR 100G, WIDE ONE, WIDE EYE, WIDE VIEW, WIDE VISION, WIDE 3D VIEW, WIDE 3D VISION, WIDE 3D VISTA, WIDE 100, WIDE 128, WIDE OPTIC, WIDE PORTRAIT, WIDE PANORAMA, WIDE PARAMOUNT, WIDE 3D PARAMOUNT, WIDE W, PRO FLASHER, LCR 120, OEM-LCR, LCR-3D, HBL201G, SR-ID 600, ULTIMA, 100SX, 200DX, 300TX, 400TX, PRO ANGLER, TOUR SERIES, PRO ANGLER 160, XTREME 160, TRACKER 160, TRAK PRO 128, 105SX, 405SX, ALL PIRANHA PRODUCTS, LEGEND 1000, LEGEND 1000 DEEP, LEGEND 2000, LEGEND 2000 DEEP, LEGEND 3000, LEGEND 3000 DEEP, ALL MATRIX ALL PIRANHA PRODUCTS, ALL FISHFINDER 300 SERIES, ALL 500 SERIES, ALL 700 SERIES, ALL 900 SERIES.
|
PC 11 Power Cable
Filtered power cable, 6 ft, waterproof. Used with all HELIX 9 Series, HELIX 10 Series, HELIX 12 Series, 800 Series, 900 Series, 1100 Series products, 797, 798.
|
Transom Mount Transducer
Dual/HD Side Imaging Transom, 20/60/180 cable degree, 200/83/455/800 kHz with built-in temperature. 20' cable.
|
XI-9-19 Dual Beam Ice Transducer 455-240kHz Features:
Compatibility:
|
Transom Mount Transducers
Transom Transducers mount on the transom (back) of the boat in contact with the surface of the water. To prevent damage to the boat or transducer. Transom mount hardware is included with the transducer. Description: New transom mount transducer design. Single/Dual Beam, 20/60 Degree, 200/83 kHz with built in temperature sensor. New design is more secure and is not a prone to kick up at high force of waves. It has an improved running angle and a optional lock down screw to override the kick up. Has same hole pattern as some older version transducers For Use With: Matrix 10, 12, 15, 17, 20, 27, 67, 77c, 87c, 97, 717, 727, 737, 767, 777, 787, 323, 343, 363, 383, 141, 161, PMax10, PMax15, PMax20, PMax210, PMax215, PMax220, 917c, 931c, 937c, 957c, 997c, 515, 525, 535, 565,580, 585c, 595c, Piranha 2, Piranha 4, XP2000, XP4000
|
Puck Transducer
Description: Puck transducer . Single/Dual Beam, 20/60 degree, 200/83 kHz with built in temperature For Use With: Legend ID40, Piranha 5, PiranhaMax 10, PiranhaMax 15, PiranhaMax 20, Matrix 15, Matrix 17, Matrix 25, Matrix 27, Matrix 55, Matrix 65, Matrix 67, Matrix 97, FF515, FF535, FF565.
|
Portable Transducer
Portable Transducers mount on the transom or side of almost any wood, aluminum, or fiberglass boat. A heavy duty rubber suction cup provides for temporary installation and holds the transducer at trolling motor speeds only. For a completely portable fishfinder, The Portable Case (PTC-W2) accessory contains all parts needed to convert your existing fishfinder to portable operation using your existing transducer. Description: Portable Transducer with Temperature Sensor, Hydrodynamic, single or dual beam (depending on which fish finder it is used with), 24 and 53 degree cone angles, 200/83 kHz. Includes 15' cable, portable mounting hardware. For Use With: Piranha 5, Matrix 15, Matrix 17, Matrix 25, Matrix 27, Matrix 55, Matrix 65, Matrix 67, FF515, FF535, FF565, PMAX10, PMAX15, PMAX 20
|
XTM 9 DI 25 T Trolling Motor Mount Transducer
Trolling Motor Mount Transducer Down Imaging/DualBeam Plus, 75°/45°, 455/800 kHz (DI) and 25°/16°, 200/455 kHz, with built in temperature, 15' Cable. Low profile design minimize snags. Easy installation, all hardware included. For Use With:
|
XTM 9 WIDE DI 20 T Trolling Motor Mount Transducer
Low profile design minimizes snags. Easy installation and all hardware is included. Features:
Compatibility:
|
Trolling Motor Transducer
Trolling Motor Mount Transducers are designed to mount on to the body of most trolling motors. A low profile shape reduces drag in the water and minimizes interference with weeds. Trolling Motor Transducers are often used in conjunction with the standard Transom Mount Transducer and connected by a switch to allow the fishfinder to display information from either the transom or the trolling motor. Some Transom Mount Transducers can be converted to Trolling Motor Mount by purchasing a Trolling Motor Adapter. Description: Trolling Motor Transducer with Temperature Sensor, Hydrodynamic, dual beam, 20 and 60 degree cone angles, 200/83 kHz. Includes 15' cable, trolling motor mounting hardware. For Use With: Piranha 5, Legend ID40, Matrix 15, Matrix 17, Matrix 25, Matrix 17, Matrix 55, Matrix 65, Matrix 67, FF515, FF535, FF565
|
Fits most 5 gallon buckets (not included). Cutting board top with tabs for fishing accessories. Bubble Box pump runs 33 hours on 2 alkaline G++DG++ cell batteries. Big hinged door for easy access. UV treated. Aerator banded to lid.
|
Fits most 5 gallon buckets (not included). Cutting board top with tabs for fishing accessories. Bubble Box pump runs 33 hours on 2 alkaline G++DG++ cell batteries. Big hinged door for easy access. UV treated. Aerator banded to lid.
|
Extremely quiet aeration pump. Operates on 2 "D" cell batteries for up to 52 hours. Powerful 3 VDC motor pumps 1.1 liters of air per minute; aerates 5-7 gallons. Water resistant case with neoprene seals and a booted waterproof switch; soft silicone airline tubing with weighted air stone; adjusted stainless steel mounting clip with fasteners. For fresh and saltwater. Space saver clam shell package 3 7/8" x 7 1/2" x 2". Also converts to protective "splash jacket".
|
Extremely quiet aeration pump. Operates on 2 "D" cell batteries for up to 52 hours. Powerful 3 VDC motor pumps 1.1 liters of air per minute; aerates 5-7 gallons. Water resistant case with neoprene seals and a booted waterproof switch; soft silicone airline tubing with weighted air stone; adjusted stainless steel mounting clip with fasteners. For fresh and saltwater. Space saver clam shell package 3 7/8" x 7 1/2" x 2". Also converts to protective "splash jacket".
|
Scotty 268 Float Tube Fish Finder and Transducer Mount. Adapt a fishfinder to your float tube or pontoon boat. Includes transducer bracket and 6' strap. Fits or can be adapted to mostfishfinder brands including: Lowrance, Eagle, Humminbird and Garmin.
|
Scotty 268 Float Tube Fish Finder and Transducer Mount. Adapt a fishfinder to your float tube or pontoon boat. Includes transducer bracket and 6' strap. Fits or can be adapted to mostfishfinder brands including: Lowrance, Eagle, Humminbird and Garmin.
|
|
|
|
|
Copyright © 2009-2023 A part of the Intelastores, Inc. Store Network Site Designed and Maintained by Inline Internet Systems, Inc. |